DLN-4SE Multi Protocol Master & Slave Adapter (with enclosure)

Key Features

• SPI master interface with configurable phase(CPHA), polarity(CPOL) and frequency (up to 48MHz);
• SPI slave interface with frequency up to 48MHz, configurable phase(CPHA) and polarity(CPOL);
• SPI Flash interface
• I2C master interface with configurable frequency (up to 1MHz);
• I2C slave interface with supported frequency up to 1MHz;
• UART interface;
• 48 digital I/O pins with debounce filter, open drain functionality and embedded pull-up resistors;
• 8 analog inputs with event-driven interface;
• 4 PWM outputs with configurable frequency and duty cycle;
• 3 Pulse and frequency counters with event-driven interface;
• 1 status LED and 2 user-configurable LED's;
• no hidden fees: API, updates, software and technical support are free;
• USB 2.0 high-speed (480 MHz) interface with Plug-and-Play detection and notification;
• RoHS Compliant

Event-Driven Interface

The DLN-4S host adapter supports an event-driven interface for digital and analog inputs, pulse counters, I2C and SPI slave modules and a UART.

Let’s see an example of how an event-driven interface for an SPI slave module can be used in your application.

According to the SPI bus specification, the data transmission can be only initialized by an SPI master device. In general, you don’t know when that occurs. Without an event-driven interface your application would need to periodically poll the adapter to check if some data is sent by the SPI bus master. Such a polling process wastes computer resources and USB bandwidth.

You can configure the SPI slave module of the DLN-4S host adapter for an event-driven interface. When an external SPI master transmits some data, the DLN-4S host adapter creates an event and notifies your application. This event contains the data sent by the SPI bus master. Your application can process the data and continue its regular execution.

In full-duplex mode, you can also send the data for the next transfer while processing an event.