USB-SPI Interface Adapters Comparison Table
The Serial Peripheral Interface (SPI) is a synchronous serial data link, developed by Motorola. SPI bus operates either in full-duplex or in half-duplex mode and can transfer data over short distances at high speeds.
In this comparison chart we compare USB-SPI interface of DLN-series interface adapters. The comparison chart includes adapters from the cheapest to the most powerful DLN-series adapters. It can help you choose the USB-SPI interface adapter that fits your purpose best.
USB-SPI Adapter | ![]() DLN-1 PC-I2C/SPI/GPIO INTERFACE ADAPTER |
![]() DLN-2 USB-I2C/SPI/GPIO ADAPTER |
![]() DLN-4M MULTIPROTOCOL MASTER ADAPTER |
![]() USB-SPI MASTER & SLAVE ADAPTER - DLN-4S |
All 4 SPI Modes Support | ![]() |
![]() |
![]() |
![]() |
SPI Interface Clock Frequency | 2 kHz - 4 MHz | 2 kHz - 18 MHz | 376 kHz - 48 MHz | 376 kHz - 48 MHz |
Frame Size | Configurable (8-bit to 16-bit) | Configurable (8-bit to 16-bit) | Configurable (8-bit to 16-bit) | Configurable (8-bit to 16-bit) |
SPI Bus Voltage | 3.3V (5V tolerant) | 3.3V (5V tolerant) | 3.3V | 3.3V |
USB Interface | ![]() Full Speed (12MHz) |
![]() Full Speed (12MHz) |
![]() High Speed (480MHz) |
![]() High Speed (480MHz) |
Interfaces | ||||
SPI Master Interface | ![]() |
![]() |
![]() |
![]() |
SPI Slave Select pins | 1 SS pin | 5 SS pins | 4 SS pins | 4 SS pins |
SPI Slave Interface | ![]() |
![]() |
![]() |
![]() |
SPI Flash Interface | ![]() |
![]() |
![]() |
![]() |
Synchronous Interface | ![]() |
![]() |
![]() |
![]() |
Asynchronous Interface | ![]() |
![]() |
![]() |
![]() |
Event-Driven Interface | ![]() |
![]() |
![]() |
![]() |
Additional Interfaces | I2C Master Interface GPIO Interface ADC, PWM Pulse Counter |
I2C Master Interface GPIO Interface ADC, PWM Pulse Counter |
I2C Master Interface GPIO Interface ADC, PWM Pulse Counter UART |
I2C Master Interface I2C Slave Interface GPIO Interface ADC, PWM Pulse Counter UART |
Configurable Delays | ||||
Configurable Delay Between Transfers | ![]() |
![]() |
![]() |
![]() |
Configurable Delay After Slave Selection | ![]() |
![]() |
![]() |
![]() |
Configurable Delay Between Slave Selections | ![]() |
![]() |
![]() |
![]() |
PC USB Host Powered | ![]() |
![]() |
![]() |
![]() |
SPI GUI Demo Examples | ![]() |
![]() |
![]() |
![]() |
Supported Operation Systems | ![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
RoHS Compliant | ![]() |
![]() |
![]() |
![]() |
Certification | ISO 9001:2008![]() |
ISO 9001:2008![]() |
ISO 9001:2008![]() |
ISO 9001:2008![]() |
USB-SPI Adapter | ![]() DLN-1 PC-I2C/SPI/GPIO INTERFACE ADAPTER |
![]() DLN-2 USB-I2C/SPI/GPIO ADAPTER |
![]() DLN-4M MULTIPROTOCOL MASTER ADAPTER |
![]() USB-SPI MASTER & SLAVE ADAPTER - DLN-4S |