USB-IO adapters allows you to use the adapter pins as general purpose input/output lines.

The most functional model is DLN-4S adapter. It is available both with a plastic enclosure (DLN-4SE) and as an assembled PCB board. The main advantage of DLN-4S USB-IO adapter that you can use up to 48 IO pins, which support pull-up resistors, debounce filter and open drain mode.

You can start with DLN-4S USB-IO adapter. Later, when you clarify the requirements, you can switch to a cheaper adapter.

The DLN-4S USB-IO Adapter supports:

  • 48 GPIO pins that can be used as digital inputs or digital outputs. You may set output values for digital outputs and get current values both for inputs and outputs.
  • pull-up resistors at all I/O pins.
  • debounce filter, which avoids sending numerous events due to contact bounce. The new value is only accepted if it is stable for a predefined period of time.
  • open drain mode at all I/O pins.
  • user configurable event generation conditions. When the input level meets the specified requirements in USB-IO interface, the adapter sends an event to your application.

List Grid

Set Ascending Direction

8 Item(s)

  1. DLN-1 PC-I2C/SPI/GPIO Interface Adapter

    DLN-1 PC-I2C/SPI/GPIO Interface Adapter

    Supported interfaces: I2C & SPI bus master, 32 digital I/O, four 10-bit analog inputs, PWM output and 32-bit pulse counter.

    PC connection: Full-Speed 12 MHz USB.

    Polling based interface.

    Learn More
    $63.20
    Add to Cart Add To Quote
  2. PC-I2C/SPI/GPIO Interface Adapter (with assembled connectors)

    DLN-1A PC-I2C/SPI/GPIO Interface Adapter (with connectors)

    Supported interfaces: I2C & SPI bus master, 32 digital I/O, four 10-bit analog inputs, PWM output and 32-bit pulse counter.

    PC connection: Full-Speed 12 MHz USB.

    Polling based interface.

    Learn More
    $68.50
    Add to Cart Add To Quote
  3. USB-I2C/SPI/GPIO Adapter

    DLN-2 USB-I2C/SPI/GPIO Adapter

    Supported Interfaces: I2C Master (up to 1MHz), SPI Master (up to 18MHz), 32 digital I/O, 8 10-bit analog inputs, 2 PWM outputs, 3 32-bit pulse counters.

    PC connectivity: Full-Speed USB (12 MHz)

    Event-driven and polling based interfaces.

    Learn More
    $98.40
    Add to Cart Add To Quote
  4. Multi Protocol Master Adapter (PCB board)

    DLN-4M Multi Protocol Master Adapter (PCB board)

    Supported Interfaces: I2C Master (up to 1MHz), SPI Master (up to 48MHz), 48 digital I/O, 4 10-bit analog inputs, 4 12-bit analog inputs, 4 PWM outputs, 3 16-bit pulse counters.

    PC connectivity: High-Speed USB (480 MHz)

    Event-driven and polling based interfaces.

    Learn More
    $116.00
    Add to Cart Add To Quote
  5. Multi Protocol Master Adapter (with enclosure)

    DLN-4ME Multi Protocol Master Adapter (with enclosure)

    Supported Interfaces: I2C Master (up to 1MHz), SPI Master (up to 48MHz), 48 digital I/O, 4 10-bit analog inputs, 4 12-bit analog inputs, 4 PWM outputs, 3 16-bit pulse counters.

    PC connectivity: High-Speed USB (480 MHz)

    Event-driven and polling based interfaces.

    Learn More
    $140.90
    Add to Cart Add To Quote
  6. Multiprotocol Master & Slave Adapter (PCB board only)

    DLN-4S Multiprotocol Master & Slave Adapter (PCB board only)

    Supported Interfaces:I2C Master & Slave (up to 1MHz), SPI Master & Slave (up to 48MHz), 48 digital I/O, 4 10-bit analog inputs, 4 12-bit analog inputs, 4 PWM outputs, 3 16-bit pulse counters.

    PC connectivity: High-Speed USB (480 MHz)

    Event-driven and polling based interfaces.

    Learn More
    $187.00
    Add to Cart Add To Quote
  7. Multi Protocol Master & Slave Adapter (with enclosure)

    DLN-4SE Multi Protocol Master & Slave Adapter (with enclosure)

    Supported Interfaces:I2C Master & Slave (up to 1MHz), SPI Master & Slave (up to 48MHz), 48 digital I/O, 4 10-bit analog inputs, 4 12-bit analog inputs, 4 PWM outputs, 3 16-bit pulse counters.

    PC connectivity: High-Speed USB (480 MHz)

    Event-driven and polling based interfaces.

    Learn More
    $211.90
    Add to Cart Add To Quote
  8. DLN-4S Adapter for Test Drive

    DLN-4S-TD DLN-4S Adapter for Test Drive

    During 45 days of Test Drive, you can evaluate the DLN-4S adapter functionality:

    Supported Interfaces: I2C Master & Slave (up to 1MHz), SPI Master & Slave (up to 48MHz), 48 digital I/O, 4 10-bit analog inputs, 4 12-bit analog inputs, 4 PWM outputs, 3 16-bit pulse counters.

    PC connectivity: High-Speed USB (480 MHz)

    Event-driven and polling based interfaces.

    Learn More
    $187.00
    Add to Cart Add To Quote

List Grid

Set Ascending Direction

8 Item(s)

USB-IO Adapters
Minimal Price: $63.20